|
The Original & Still The Best! Accumeter Super Pro XV(Digital meter) & Accumeter Super Pro VI(Analog meter) Underground Geosurveyors
|
|
New Accumeter Pro XV Digital 
Electronically checks ground resistivity between probes for correct metal/mineral & treasure location, size & depth. |
KNOW WHAT IT IS ... WHERE IT IS... AND HOW DEEP IT IS!
|
| |
 |
Accurately Locates With Its Simplified Meter & Light Indicators For Easy Reading...
Gold * Silver * Copper * Royal Metals * Iron * Minerals * Buried Treasure * Placer Deposits * Ore Bodies * Tunnels/Caves * Subsurface Water * The "Mother Lode"
|
NOTE: You can actually tell where the gold or precious metals are by reading the meter. When the (4) rods are laid out in the patterns below (see examples) the gold/silver will be a lower reading and the needle will be in the gold section of meter. You can also find the depth of the cache by using Example D as shown below.
How The Accumeter Works!
Different Rod Patterns - Carrier Wave Path Examples Copper Rods Are Numbered 1), 2), 3), 4) and are driven into the ground at the points indicated by the numbers. When the machine is turned on the carrier waves in the ground are read and sent to the meter for analysis of the ground resistivity, stating whether there is gold or silver, iron, minerals, inert ground, water, or caves below the ground. |
 |
Example A - Lower Reading 360 Ohms Indicates Copper
Example B - 300 Ohms indicates gold target
Example C - Find The Lowest Reading And Move Rods Toward The Target Until The Treasure Is Located
Example D - After The Gold/Treasure Is Found Locate
The Depth By Using This Pattern
|
|
